C2858B HP DesignJet 650c printer model b

HP DesignJet 650c printer model b C2858B

Status: Available
Condition: OEM

Your Price: RFQ

Printer Parts
Printer Information
Related Models

Absorber

C2858-00078 - Absorber for HP DesignJet 650C series

C2858-60114 - Bail assembly - Has star wheel assemblies attached

Bearing

1410-0708 - Sleeve bearing - Used on left end of overdrive assembly

C2847-00029 - Carriage belt 24in belt

1500-0855 - HP Designjet 600, 650C Motor Belt (Small belt).Y axis drive belt.

Bracket

C1633-40037 - Right bail bracket

C1633-40038 - Left bail bracket for Hewlett Packard Designjet Plotters.

C1633-40064 - Media sensor mounting bracket

C1633-60029 - Y-drive assembly bracket

C2858-00007 - Encoder spring bracket - Located on the right side of the plotter

C2847-00051 - Y-tensioner bracket on left side plate

07575-40125 - Drive-tensioner bracket for pen carriage drive belt tensioning wedge

Bushing

C1633-20034 - Bushing for reduction pulley

C2858-40016 - Carriage bushing - Supports front of carriage on slider rod /// order carriage unit C2858-60023

C2858-40017 - Rear slider rod bushing (Spring loaded) - Slides into the rear center of the carriage assembly

C3195-40076 - Cutter bushing - Connects cutter assembly to slider rod

Cable

C2847-60005 - Power supply cable - Has 12-pin (F) connectors - 33cm (13in) long

C2847-60019 - Ribbon cable - 5-pin (F) connector to 5-pin (F) connector - 40.3cm (15.9in) long

C2858-60011 - Cable harness assembly

C2858-60024 - Carriage assembly trailing cable

C2951A - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

5063-1256 - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

5063-1257 - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

17255D - RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long

24540-80010 - Centronics (parallel) cable - 36-pin (M) to 25-pin (M) - 2.0m (6.6ft) long

C1633-40052 - Bail lift cam - Activates the bail lift lever (part of the bail lift mechanism kit)

C2858-40043 - Spindle end cap - Small core spacer - Removes for loading the media roll. Please order spindle assembly.

C3172-40006 - Spindle end cap - Small core spacer - Removes for loading the media roll. Please order spindle assembly.

C3190-40076 - Cartridge cap - Keeps cartridges from drying out when carriage is parked in service station

Carriage

C2858-60023 - Pen carriage assembly - Drafting 'Head' assembly (Holds the four ink cartridges)

Caster

1492-0145 - Lockable caster assembly - Includes stem and washer

Clamp

9170-1533 - Clamp - Holds ferrite in place within electronics enclosure

07575-40013 - Left belt clamp - Attaches carriage belt to carriage

07575-40014 - Right belt clamp - Attaches carriage belt to carriage

1400-1021 - Cable clamp for HP DesignJet 650C Series

Cleaner

C6247A - DesignJet cleaning kit - Includes cleaning solution and 20 cleaning rags

Control Panel

C2847-60087 - Control panel assembly - Includes ribbon cable

Cover

C1633-00031 - MIO slot access cover

C2847-00010 - Electronic enclosure cover

C2858-40044 - Right end cover - For end of upper stand (Chassis) assembly

C2858-60215 - Left end cover assembly - For end of upper stand (Chassis)

C4705-60084 - Rollfeed access cover - Opens forward to allow access to paper spindle assembly - Includes cover and springs

Cross Brace

C3185-00034 - Cross-brace - Brace that connects and supports the two stand legs

Cutter

C2858-60021 - Cutter mechanism assembly - Auto cutter for rollfeed paper

Enclosure

C2847-60004 - Enclosure (Outer) - Metal structure installed over the inner electronics enclosure

C2847-60018 - Enclosure (inner) - Metal structure that forms the base of the electronics enclosure assembly

Encoder

C2858-60010 - Linear encoder IC - Detects carriage position as it moves along encoder strip

3160-0814 - Tubeaxial fan (Matsushita FBK-09A12M2-MOD) - 82.5mm (3.25in) mount hole spacing, 25.5mm (1.0in) thick, 12VDC, 35.3CFM

Ferrite Assembly

9170-1535 - Split ferrite - Installed inside electronics enclosure

51642A - Polyester matte film - 61cm (24in) x 36.6m (120ft) roll

51642C - Polyester matte film - B size (11 x 17-inches) - 40 sheets

51642G - Polyester Matte Film - D Size - 22 x 34 inches (40 Sheets)

51642J - Polyester matte film - Architectural D size (24 x 36-inches) - 40 sheets

51642F - Film (Matte) for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 D size

51642H - Film (Matte) for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 D size

Firmware

C2858-60162 - ROM SIMM (Version 5.2) - Plugs into main logic board

C1633-40019 - Overdrive gear cluster

C1633-40027 - Bail engaging lever gear

C1633-40028 - Bail lift cam gear

Gear Assembly

C4705-60089 - Clutch / overdrive gear assembly - Includes gear, clutch, retaining clip, and two washers

Guide

C4704-40109 - MIO board guide

Handle

C1633-40030 - Pinchwheel manual lift handle - Paper loading lever

Hinge

07575-40111 - Female half of hinge (on chassis) - For lift-up window

07575-40012 - Male half of hinge (on window) - For lift-up window

Holder

C1633-40094 - Holder - For 'Help' card and hand held cutter

Housing

C1633-00033 - MIO support - Metal housing for the plug-in MIO card - Does not include the board guides

C2858-40001 - Service station housing

C4704-60082 - Housing assembly (on left side)

IC ROM

1818-5637 - EEPROM (U42) - On main logic board

1818-6089 - ROM - (U31)ON main logic board - Revision is 5.11

1818-6090 - ROM - (U30)ON main logic board - Revision is 5.11

1818-6091 - ROM - (U33)ON main logic board - Revision is 5.11

1818-6092 - ROM - (U32)ON main logic board - Revision is 5.11

Insulator

C1633-00080 - Power supply insulator (Bottom)

C2847-00019 - Power supply insulator (Top) - Installed over the power supply

C2847-60061 - Hardware kit - Package of 6 screws for stand assembly

C2858-90169 - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (English)

C2858-90170 - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (Chinese)

C2858-90171 - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (Thai)

C2858-90172 - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (German)

C2858-90173 - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (French)

C2858-90174 - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (Spanish)

C2858-90175 - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (Italian)

C2858-90176 - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (Japanese)

C2858-90177 - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (Portuguese)

C2858-90178 - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (Korean)

Label

C3195-00057 - Safety label - Provides warning that encoder strip is sharp

C2847-60002 - Leg assembly - Side support with foot bar and two casters

Lever

C2847-40013 - Bail engaging lever - Used to move engaging lever gear

Lifter

C2858-60209 - Bail lift mechanism kit - Includes cam gear, engaging lever, engaging lever gear, engaging lever spring, Y-tensioner bracket, bail lift cam, cam gear support, screws, and washers

Lubricant

C6074-60460 - Grease - GREASE APPLICATION KITGrease - For helical gear (Drive roller gear)

6040-0855 - SYNTHETIC OIL (4oz Plastic Bottle) Front and Rear Slider Rods Synthetic oil - One plastic bottle of 3.5oz / 118.29 ML

Maintenance Kit

5182-7317 - Maintenance kit

Manual

07595-90001 - HP-GL Reference Guide - Programming Information

C2858-90000 - DesignJet 650C service manual (English)

C6072-60281 - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (English)

C6072-60301 - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English)

5959-9733 - Manual for Designjet 820 MFP Series, DesignJet-C1633A, DesignJet 600, DesignJet 650

Media Bin

C2847-00005 - Media bin back - For top of wire rack below plotter

C2847-00006 - Media bin front - Main part of wire rack below plotter

C2847-00012 - Media bin adjust - Adjustable media bottom stop in wire rack

Memory

C2065A - 4MB, 80nS, 36-bit SIMM memory module - For HP Plotters, LaserJet IIISi, 4/4M, 4Si/MX and other models.

C2066A - 8MB, 80nS, 36-bit SIMM memory module - For HP LaserJet IIISi, 4/4M, 4Si/MX

D3578-69001 - 32MB, 70nS, 36-bit parity SIMM memory module

Module

J2382-69003 - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors

J2590-69001 - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors

J2592-69001 - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

J4102-61021 - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

J4102-69022 - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

Motor

C2848-60003 - Motor/encoder assembly (includes helical drive gear) - 'X' axis drive - NOTE: motor and gear are only sold as a set

C2847-60221 - Motor assembly - Includes power cable

Mount

C1633-20006 - 'X' axis motor mount

C1633-40089 - Overdrive mount block

NamePlate

C2858-00017 - Nameplate - DesignJet 650C printer logo

Overdrive Assembly

C4705-60121 - Overdrive assembly (D) - Includes roller, enclosure, bushings

Overlay

C2858-60026 - Control panel overlay (English)

C2858-60028 - Control panel overlay (Spanish)

C2858-60029 - Control panel overlay (French)

C2858-60031 - Control panel overlay (Italian)

C2858-60033 - Control panel overlay (Portuguese)

C2858-60030 - Control panel overlay (Japanese)

Packaging

C3195-60113 - Repackaging Kit - for Main Plotter Unit

Paper

51630Y - Color InkJet CX cut sheet paper - A size (8.5 x 11-inches) - 200 sheets per package

51631A - Color InkJet CX cut sheet paper - B size (11 x 17-inches) - 200 sheets per package

51631D - Color InkJet paper - 61cm (24in) x 45.7m (150ft) roll

51631G - Color InkJet paper - 61cm (24in) x 45.7m (150ft) roll

51648D - Heavyweight color InkJet paper - 61cm (24in) x 45.7m (150ft) roll

C1860A - HP Bright white InkJet paper - 61cm (24in) x 45.7m (150ft) roll

C3851A - Opaque bond paper - 61cm (24in) x 45.7m (150ft) roll

C3855A - Bright White Inkjet Paper - 61cm (24in) x 45.7m (150ft) roll

C3889A - Color InkJet paper - 61cm (24in) x 45.7m (150ft) roll

51631B - Color InkJet CX cut sheet paper - A3 size (29.7cm x 42.0cm) - 200 sheets per package

51631H - Color InkJet cut sheet paper - A1 size (59.4cm x 84.1cm) - 100 sheets per package

PC Board

C2858-60105M - Interconnect board

C2858-69207 - Main logic board, HP OEM DesignJet MAIN LOGIC PCA BOARD FOR 650C

J2555-69013 - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors

J2550-69013 - EtherTwist 10Base-T LAN interface board

J4100-69001 - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors

0950-2417 - Power supply board

5960-8286 - Shipping Material/Carton for DesignJet 200 D size, DesignJet 650, DesignJet 200 E size

Plate

C1633-00009 - Axial Bias Plate - Installed between the paper drive (Platen) Roller Assembly and the right frame

C2847-00027 - SIMM Plate - Covers access to SIMM slot connectors

Platen

C2847-00041 - Entry platen - Installed over the paper drive (platen) roller assembly

PostScript

C3545-60001 - Adobe's PostScript (level two) SIMM module

Power Cord

8120-4211 - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in South Africa and India)

Power Module

0957-2340 - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.

0957-2481 - Pwra brk uni 12vdc 15w

Power Supply

0950-2623 - Switching power supply (Delta DPS-158ABA) - 100-240VAC input, 47-63Hz - Four DC outputs (5.15V, +12V, -12V, 24V) - 158 watts - Includes upgrade sticker

Primer

C2858-60003 - Primer assembly - Mounts under the service station assembly on the left side of the plotter

Pulley

C3170-60009 - Reduction pulley - Includes 2 Bearings Shaft (0.16in Diameter on Both Ends) Flange Pulley and Instructions

07570-60105 - Idler pulley - For main drive belt

07570-60112 - Idler drive pulley - Applies tension to the pen carriage drive belt (small belt)

Receptacle

C1633-60020 - AC power recptacle assembly - Includes receptacle, wires, grounding lug, and socket to power supply

Recovery Kit

5183-5268 - Recovery Kit for DeskJet 1200 Series, DeskJet 850 Series, DeskJet 1000 Series, DeskJet 1100 Series

5184-2833 - Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions

Reservoir

C2858-40038 - Reservoir - Attaches to left side chassis - Ink absorber is inserted into this reservoir

C2858-40039 - Ink drop reservoir - Installs on right side of plotter

Roller

C4699-60042 - Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder

Rollfeed Assembly

C4704-60199 - Brake/housing assembly (on right side) - Accepts the flange end of the spindle rod assembly - Includes the 2 housing pieces, 2 brake shoes, brake gear, brake lever, and springs

Sensor

C2847-60021 - Media sensor assembly - Includes cable

C2847-60022 - Pincharm sensor - Includes cable

C2847-60069 - Sensor assembly

C2858-60007 - Optical primer sensor

C3180-60034 - Pincharm sensor - Includes cable

Service Station

C2858-60152 - Service station kit - Includes service station cap, four primer tubes, absorber, sled, wiper, drop detect sensor, and bail sensor cable

Software

C6072-60284 - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (German)

C6072-60285 - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (French)

C6072-60286 - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Spanish)

C6072-60287 - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Italian)

C6072-60304 - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (German)

C6072-60305 - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (French)

C6072-60306 - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Spanish)

C6072-60307 - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian)

Spindle

C2847-60093 - Rollfeed spindle rod assembly (D-size 24 inch ) - Includes spindle and end caps

C3172A - D/A1 rollfeed spindle rod assembly for DesignJet 6xx/7xx - Includes spindle and end caps

Spring

1460-2061 - Extension spring - Zinc plated music wire, 0.875in long, 0.187in OD, 0.020in wire diameter, 1.8 in/lb rate - For pen carriage drive belt pulley tensioning wedge

C1633-80006 - Bail engaging lever spring

C1633-80014 - Compression spring - For the rear bushing on the carriage

C2858-00006 - Encoder spring for HP DesignJet 650C Series

C4723-80027 - Cutter shim/bail spring

Starwheel

C4713-60035 - Starwheel mount assembly - Includes cover, body, spring and two starwheels

Strip

C4713-60098 - Encoder strip assembly (D-size) - Includes encoder strip and encoder strip spring

Switch

C2847-60044 - Power switch assembly - Includes cable

Wedge

07550-40104 - Tensioning wedge (cam tensioner) - For the pen carriage drive belt pulley

Window

C2847-40003 - Lift-up viewing window