HP C3181A DesignJet 200 Printer C3181A

Name: HP C3181A DesignJet 200 Printer (C3181A)
Brand: HP

Options for C3181A:

Refurbished

$2,596.68

Status: Available
Condition: OEM

Your Price: RFQ

Printer Parts
Printer Information
Related Models

Adapter

5188-6700 - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector

Bail

C3191-60095 - Bail assembly - Includes bail, starwheels, and brackets

Belt

1500-0855 - HP Designjet 600, 650C Motor Belt (Small belt).Y axis drive belt.

1500-0856 - Carriage belt for HP DesignJet 36inch size plotters.

Bezel

C3180-40014 - Front panel bezel - Mounts over front panel

Bracket

C1633-00132 - Encoder spring bracket

C1633-40037 - Right bail bracket

C1633-40038 - Left bail bracket for Hewlett Packard Designjet Plotters.

C1633-40093 - Encoder strip bracket

C1633-60029 - Y-drive assembly bracket

C2847-00051 - Y-tensioner bracket on left side plate

C3180-40013 - Bracket for bail switch assembly - Installed to the right side plate of the plotter

07575-40125 - Drive-tensioner bracket for pen carriage drive belt tensioning wedge

Bushing

C1633-40082 - Pincharm spring retaining bushing

C1633-20034 - Bushing for reduction pulley

Cable

C2847-60005 - Power supply cable - Has 12-pin (F) connectors - 33cm (13in) long

C2847-60019 - Ribbon cable - 5-pin (F) connector to 5-pin (F) connector - 40.3cm (15.9in) long

C2913A - RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long

C2950A - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

C2951A - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

C2990A - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long

C2991A - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long

C3180-60007 - Trailing cable for HP DesignJet 220 D size

A6144-63008 - RS-232C serial cable - 25-pin (M) to 9-pin (F) - 3.0m (9.8ft) long

5063-1256 - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

5063-1257 - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

17255D - RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long

17302A - RS-232C serial cable - 25-pin (M) to 8-pin (M) DIN - 1.5m (4.9ft) long

24540-80010 - Centronics (parallel) cable - 36-pin (M) to 25-pin (M) - 2.0m (6.6ft) long

24542G - RS-232C serial cable - 25-pin (M) to 9-pin (F) - 3.0m (9.8ft) long

Cam

C1633-40052 - Bail lift cam - Activates the bail lift lever (part of the bail lift mechanism kit)

C1633-20012 - Pinch arm bar cam (E-size) - Long rod from left to right side of printer - Used to lift the pinch arms

C3180-40020 - Pinch arm cam - Attached to pinch arm (Media) lever

C3190-60149 - Left cam journal - Mounted on left end of pinch arm shaft

Carriage

C1633-60120 - Carriage assembly - Includes carriage PC board

C2847-60071 - Carriage assembly - Includes carriage PC board

Caster

1492-0145 - Lockable caster assembly - Includes stem and washer

Clamp

9170-1533 - Clamp - Holds ferrite in place within electronics enclosure

Control Panel

C3180-60010 - Control panel - Mounts in control panel support

Cover

C1633-40003 - Service station cover

C3181-60008 - Bottom cover for HP DesignJet 200 E size

C3180-40003 - Left end cover assembly - For end of upper stand (Chassis)

C3180-40004 - Right end cover - For end of upper stand (Chassis) assembly

C3181-00005 - Cover - Top center of plotter

C3181-00003 - Electronics enclosure - The larger of the two metal covers for the area containing the main PC board and power supply

C3181-00004 - Electronics enclosure - The smaller of the two metal covers for the area containing the main PC board and power supply

Cross Brace

C3186-00034 - Cross-brace - Brace that connects and supports the two stand legs

Door

C1633-00068 - Door for tensioner housing

C3180-40015 - Door - On right half of front panel bezel

C3180-40016 - Help card lock - Mounts to top of fold out front panel door

Fan

3160-0814 - Tubeaxial fan (Matsushita FBK-09A12M2-MOD) - 82.5mm (3.25in) mount hole spacing, 25.5mm (1.0in) thick, 12VDC, 35.3CFM

Ferrite Assembly

9170-1535 - Split ferrite - Installed inside electronics enclosure

9170-1536 - Ferrite ring - Installed on Y-drive assembly bracket

Film

51642A - Polyester matte film - 61cm (24in) x 36.6m (120ft) roll

51642C - Polyester matte film - B size (11 x 17-inches) - 40 sheets

51642G - Polyester Matte Film - D Size - 22 x 34 inches (40 Sheets)

51642J - Polyester matte film - Architectural D size (24 x 36-inches) - 40 sheets

51642K - Polyester matte film - E size (34 x 44-inches) - 40 sheets

51642N - Polyester matte film - Architectural E size (36 x 48-inches) - 40 sheets

51642F - Film (Matte) for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 D size

51642H - Film (Matte) for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 D size

Gear

C1633-40019 - Overdrive gear cluster

C1633-40027 - Bail engaging lever gear

C1633-40028 - Bail lift cam gear

C1633-60030 - Clutch / overdrive gear assembly - Includes gear, clutch, retaining clip, and two washers.

Gear Assembly

C4705-60089 - Clutch / overdrive gear assembly - Includes gear, clutch, retaining clip, and two washers

Guide

C1633-00056 - Trailing cable front guide (Tray)

C3181-40018 - Media guide for HP DesignJet 200 E size

Handle

C3180-40017 - Handle - Right side of plotter - Raise to load paper

Hardware

0510-0083 - Retaining E-ring - 0.250-in diameter, steel zinc-dichromate dip

0570-1316 - Machine screw/standoff (Textron R86-20000-382) - 4-40 thread, 9.4mm long, hex head - Steel

Housing

C1633-40001 - Service station housing - The base of the service station assembly

C1633-40065 - Tensioner housing - Holds the tensioner wedge and tensioner spring for the carriage drive belt idler pulley

C3180-40012 - Switch housing (mount) - For protecting the power switch

IC ROM

1818-6521 - Masked ROM - U28 on main logic board (Rev A.01.02) - NOTE: replace EPROMs (40-pin) U4, U9, U28, and U29 with New masked ROMS (42-pin) in U28/U29 sockets and leave U4/U9 empty

1818-6522 - Masked ROM - U29 on main logic board (Rev A.01.02) - NOTE: replace EPROMs (40-pin) U4, U9, U28, and U29 with New masked ROMS (42-pin) in U28/U29 sockets and leave U4/U9 empty

Insulator

C3180-60013 - Power supply insulator - Installed over power supply board

Keycap

5041-1203 - Power switch keycap (White)

Kit

C2847-60061 - Hardware kit - Package of 6 screws for stand assembly

Label

C3195-00057 - Safety label - Provides warning that encoder strip is sharp

Latch

C3180-40019 - Latch assembly for top center cover

Leg

C2848-60002 - Leg assembly - Side support with foot bar and two casters

Lever

C2847-40013 - Bail engaging lever - Used to move engaging lever gear

Lifter

C2858-60209 - Bail lift mechanism kit - Includes cam gear, engaging lever, engaging lever gear, engaging lever spring, Y-tensioner bracket, bail lift cam, cam gear support, screws, and washers

Link

C1633-60033 - Automatic cartridge adjust linkage

Lubricant

6040-0911 - Special lubricating oil - For carriage slider rod surface - (syringe with 35cc oil)

6040-0858 - Lubricant : Special lubricating oil - For carriage slider rod surface - 4oz (113g) plastic bottle of synthetic oil

C3190-60155 - Grease - GREASE APPLICATION KITGrease - For helical gear (Drive roller gear)

C6074-60460 - Grease - GREASE APPLICATION KITGrease - For helical gear (Drive roller gear)

6040-0855 - SYNTHETIC OIL (4oz Plastic Bottle) Front and Rear Slider Rods Synthetic oil - One plastic bottle of 3.5oz / 118.29 ML

21030 - Grease - GREASE APPLICATION KITGrease - For helical gear (Drive roller gear)

Maintenance Kit

5182-7322 - Maintenance kit

Manual

07595-90001 - HP-GL Reference Guide - Programming Information

C3180-90001 - C3180A and C3181A DesignJet plotter users guide

C3180-90002 - C3180A and C3181A DesignJet plotter users guide (Korean)

C3180-90003 - C3180A and C3181A DesignJet plotter users guide (Taiwan)

C3180-90004 - C3180A and C3181A DesignJet plotter users guide (German)

C3180-90005 - C3180A and C3181A DesignJet plotter users guide (French)

C3180-90006 - C3180A and C3181A DesignJet plotter users guide (Spanish)

C3180-90007 - C3180A and C3181A DesignJet plotter users guide (Italian)

C3180-90008 - C3180A and C3181A DesignJet plotter users guide (Japanese)

C3180-90009 - C3180A and C3181A DesignJet plotter users guide (Portuguese)

C3180-90010 - C3180A and C3181A DesignJet plotter users guide (Chinese)

C3187-90000 - C3180/81A and C3187/88A DesignJet plotter service manual

C6072-60281 - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (English)

C6072-60301 - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English)

5959-9733 - Manual for Designjet 820 MFP Series, DesignJet-C1633A, DesignJet 600, DesignJet 650

5960-3743 - Manual for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 D size

Media Bin

C1633-00019 - Media bin back - For top of wire rack below plotter

C1633-00020 - Media bin front - Main part of wire rack below plotter

C1633-00044 - Media bin adjust - Adjustable media bottom stop in wire rack

Memory

C2065A - 4MB, 80nS, 36-bit SIMM memory module - For HP Plotters, LaserJet IIISi, 4/4M, 4Si/MX and other models.

C2066A - 8MB, 80nS, 36-bit SIMM memory module - For HP LaserJet IIISi, 4/4M, 4Si/MX

D2381-63001 - 2MB, 80nS, 36-bit SIMM memory module

D2152-63001 - 8MB, 80nS, 36-bit SIMM memory module

D2152-69001 - 8MB, 80nS, 36-bit SIMM memory module

D2156-63001 - 4MB, 80nS, 36-bit SIMM memory module

D2156-69001 - 4MB, 80nS, 36-bit SIMM memory module

Module

J2383-61005 - External token ring interface module - Has DB-9 connector

J2382-69003 - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors

J2592-61001 - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

J2590-61011 - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors

J2590-69001 - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors

J2592-69001 - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

J2593-69001 - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors w/power supply.

J2594-61011 - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors

J3258-61021 - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

J4102-61021 - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

J4102-69022 - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

Motor

C2848-60003 - Motor/encoder assembly (includes helical drive gear) - 'X' axis drive - NOTE: motor and gear are only sold as a set

C2847-60221 - Motor assembly - Includes power cable

C3180-60005 - Stepper motor for HP DesignJet 200 D size

Mount

C1633-20006 - 'X' axis motor mount

NamePlate

C3187-00011 - Nameplate - DesignJet 200/220 printer logo

Oil

6040-0990 - Special lubricating oil - For carriage slider rod surface - (5cc oil)

Overdrive Assembly

C3191-60138 - Overdrive and bail kit - Includes left and right bail brackets, 14 starwheel mount assemblies, bail lift mechanism kit, overdrive roller, overdrive enclosure, media guides

Paper

C1860A - HP Bright white InkJet paper - 61cm (24in) x 45.7m (150ft) roll

C3854A - Opaque bond paper - Architectural E size (36 x 48-inches) - 100 sheets

C3855A - Bright White Inkjet Paper - 61cm (24in) x 45.7m (150ft) roll

PC Board

C3180-69102 - Main logic board

0950-2417 - Power supply board

J3258-61011 - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN

5960-8286 - Shipping Material/Carton for DesignJet 200 D size, DesignJet 650, DesignJet 200 E size

Pinch Assembly

C1633-60039 - Pincharm assembly - Curved black plastic plate with four small rubber rollers - Does NOT include spring or bushing

Platen

C3181-00002 - Entry platen - Large structure in front of platen roller

Power Cord

8120-0698 - Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in the USA and Canada)

8120-1351 - Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei)

8120-1369 - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China)

8120-1378 - Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam)

8120-1689 - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam)

8120-2104 - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland)

8120-2956 - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Denmark)

8120-4211 - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in South Africa and India)

8120-4753 - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 100V in Japan)

8120-6302 - Daisy chain power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output

8121-0877 - Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in the USA and Canada)

Power Module

9100-5176 - Pwer supply, 13v/300ma jpn

0957-2197 - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.

5188-5676 - Power module (wall mount) - Input voltage 100VAC, 47/63Hz - Output voltage 13VDC, 800mA, 10.4 watts (for use in Japan)

0950-2372 - Power supply module - 100-240VAC input, 47-63Hz, requires separate AC power cord - 5VDC output, 1A, 5 watts

0950-3172 - Power supply module - 240VAC input, 47-53Hz - 13VDC output, 300mA (Australia)

0950-3169 - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.

0950-3171 - Power supply module - 220-240VAC input, 47-53Hz - 13VDC output, 300mA (U. K. and Hong Kong)

0950-3349 - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector Power supply module - 120VAC input, 60Hz - 12VDC output, 1.0A

0950-3350 - Wall mount power supply module (Leader Electronics 48130625HK) - 200VAC input, 48-52Hz - 13VDC output, 625mA (Hong Kong)

0950-3351 - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea)

0950-3352 - Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan)

0950-3354 - Wall mount power supply module (MEI-AH ED12010) - 220-250VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (South Africa)

0957-2109 - Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 800mA (Europe and Israel)

0957-2110 - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.

0957-2134 - Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan)

0957-2340 - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.

0957-2481 - Pwra brk uni 12vdc 15w

Power Supply

0957-2192 - Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 800mA (Europe and Israel)

0957-2194 - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea)

5188-5673 - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector Power supply module - 120VAC input, 60Hz - 12VDC output, 1.0A

0957-2228 - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.

0957-2229 - Power module (wall mount)- Input voltage 220-250VAC, 47/53Hz - Output voltage 13VDC, 800mA, 10.4W (Worldwide)

0950-2623 - Switching power supply (Delta DPS-158ABA) - 100-240VAC input, 47-63Hz - Four DC outputs (5.15V, +12V, -12V, 24V) - 158 watts - Includes upgrade sticker

Print Server

J3265A - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN

J4101-61011 - External JetDirect LAN interface module with EtherTwist 10Base-T/100BaseTX connector

Pulley

C3170-60009 - Reduction pulley - Includes 2 Bearings Shaft (0.16in Diameter on Both Ends) Flange Pulley and Instructions

07570-60105 - Idler pulley - For main drive belt

07570-60112 - Idler drive pulley - Applies tension to the pen carriage drive belt (small belt)

Receptacle

C3180-60006 - AC power receptacle assembly - Includes cable

Roller

C2859-60004 - Paper drive (platen) roller assembly - Long gear driven roller

C3191-60040 - Overdrive roller - Shaft with rollers - Runs width of plotter

C4700-60042 - Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder

Sensor

C3180-60009 - Sensor - For lift-up view window

C3180-60034 - Pincharm sensor - Includes cable

C3180-60001 - Media sensor assembly

C3190-60130 - Sensor mechanism - Does NOT include the media sensor assembly

Service Station

C2847-60083 - Hewlett Packard Service station kit assembly for Designjet and Plotters.

Software

C6072-60284 - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (German)

C6072-60285 - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (French)

C6072-60286 - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Spanish)

C6072-60287 - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Italian)

C6072-60304 - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (German)

C6072-60305 - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (French)

C6072-60306 - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Spanish)

C6072-60307 - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian)

Spring

C1633-80016 - Linkage spring - Installed between Y-tensioner bracket and automatic carriage adjust linkage

C3180-80001 - Window spring for HP DesignJet 200 D size

1460-2061 - Extension spring - Zinc plated music wire, 0.875in long, 0.187in OD, 0.020in wire diameter, 1.8 in/lb rate - For pen carriage drive belt pulley tensioning wedge

1460-2139 - Compression tensioner spring - Stainless steel, passivity finish, 41.3mm long, 9.14mm OD, 42um wire diameter, 44.5 N/mm rate - Installed on shaft of tensioning wedge for carriage drive belt idler pulley

C1633-00002 - Encoder strip spring - Installed on right side of plotter

C1633-80003 - Blade spring - Installed on right side of trailing cable front guide

C1633-80006 - Bail engaging lever spring

C1633-80005 - Compression spring - Installed between pincharm assembly and bushing

C1633-80014 - Compression spring - For the rear bushing on the carriage

Stand

C3193A - DesignJet 230/250C Optional Stand (E/A0) - Includes legs, casters, brace, wire form paper deflector, and paper bin

Starwheel

C4713-60035 - Starwheel mount assembly - Includes cover, body, spring and two starwheels

Strip

C4714-60098 - Encoder strip assembly (E-size) - Includes encoder strip and encoder strip spring

Support

C2847-40015 - Cam gear support

C3190-40026 - Control panel support - will come with control panel and support.

Switch

C3180-60002 - Bail switch assembly

Wedge

07550-40104 - Tensioning wedge (cam tensioner) - For the pen carriage drive belt pulley

07570-40105 - Main tensioning wedge - For the carriage drive belt idler pulley

Window

C3181-60039 - Lift-up viewing window assembly

Wiper

C3180-60014 - Wiper assembly - Includes wiper rocker, wiper rod and wiper pad

C1633-40006 - Wiper pad - Part of wiper assembly

HP C3181A DesignJet 200 Printer

Manufacture:

HP

MPN: C3181A
Description:

HP C3181A DesignJet 200 Printer

Condition: OEM
Warranty: 1 year warranty with OEM supplies from the manufacture.
Product Options:

Refurbished available for $2,596.68

Image/s:

This product does not have an image.

Product Tags: C3181A Plotter C3181A

HP
HP C3180A DesignJet 200 Printer
C3180A