CH114A HP DesignJet h35100 oem eu printer

HP DesignJet h35100 oem eu printer CH114A

Status: Available
Condition: OEM

Your Price: RFQ

Printer Parts
Printer Information
Related Models

Accessory

CH971-63114 - High Density Polyethylene (HDPE) funnel - 32Oz capacity - Facilitates emptying ShopVac waste ink into waste ink bottle

CH971-57158 - Kit Accessory Piranha

CH971-91490 - Y-axis alignment bar - Includes fine-thread screws for adjusting the Y-axis alignment of the printheads - Located in front of the printheads

CH971-57101 - Encl Ohs Piranha Base

Bearing

CH971-91629 - Fmk Tool Bearing Carriage Install N

CH971-91640 - Grit roll bearings kit - Includes 12 units

CH971-90710 - Carriage drive timing belt - Located between the carriage drive motor and the carriage drive shaft. Carriage Drive Timing Belt For HP DJ H35100 H35500 H45500 H45100 and similar Scitex Designjet model family types.

CH971-91530 - Drive belt - Used for the service station wiper motion

Bottle

CH154-67015 - Flush bottle - Squeeze bottle with label for UV flush

CH971-50179 - Assy Cbl Piranha Ac Pwr To Ebox

CH971-91514 - Frm Assy Ebox N

CH971-91592 - Frm Assy Ebox Oce Rohs N

Bracket

CH971-57219 - Carriage drive bracket - For use with Designjet H series and Scitex FB910/FB950 printers

Brush

CH971-57155 - Assy Cvr Piranha Brush

CH971-62994 - Brush Strip 2.5 Lg 0.006 Dia

Cable

CH971-50148 - Cable assembly - Cable between the headboard and the UV lamp - For the Scitex FB950 and the Designjet H-Series

CH971-50163 - Cable harness - Goes from the OHS board to the ink pumps

CH971-52323 - Cable - Used to connect the printer directly to a print server - For use without a hub

CH971-57303 - Cable - Goes from the headboard to the air valve assembly

CH971-91589 - Printhead cap - Used to cap a printhead port or similar luer fitting location

CH971-91590 - Tube cap - Used to cap the end of the luer fitting that normally connects to the ink tube

Carriage

CH971-91497 - Carriage headboard assembly - For use with the Designjet H-Series and Scitex FB950 printer

CH971-91502 - Carriage drive assembly with bracket - For use with Scitex FB950/FB950 and Designjet H series

CH971-57391 - Assy Carriage Holddown Piranha

CH971-91609 - Kit Brg Lower Carriage

CH971-91621 - Frm Assy Carriage N

0901497 - Order Ch971-91497

Caster

CH971-91591 - Frm Caster Stand N

CH971-91647 - Frm Set Caster Stand N

Cleaner

CH151A - lamp filters is suitable for HP FB950 printers. This is HP original part (number CH151A). Each filter is 14.3cm long 8.3cm wide and 0.3cm thick.

CH154-67045 - Clip assembly - Includes one unit, does not include the taller luer cap required for use with the clamp - Used on the printhead ink U-tubes - For use with Designjet H-series and Scitex FB950

CH971-91001 - Clip - Connected to the trolley and provides attachment points for the carriage drive belt on both ends

Connector

CH971-57327 - Complete ink tube/filter/connectors assembly - Used with the ink boxes - For use with Scitex FB950/FB500/FB700 and Designjet H (CS 5400uv) printers

Control Panel

CQ114-67054 - Touch-sensitive LCD control panel - For the Scitex FB500/FB700 printer

CH971-91509 - Touch-sensitive color LCD control panel - Used on all Designjet H-series and ColorSpan 5400UV series printers

L1Q41-67084 - FrmLcdU FRONT LCD PANEL

0901509 - Order Ch971-91509

Coupler

CH971-91634 - Off-Head Supply (OHS) ink coupler - Includes one coupling and the nut used to secure it on the printer - This is the quick-disconnect attachment for the ink boxes and receives the connector from the inkbox pigtail

Cover

CH971-57139 - Assy Covers Piranha

Encoder

CH154-67005 - Encoder strip actuator assembly - Includes bracket - Used in all lifting assemblies and service station - For the Scitex FB950 printer

CH971-90708 - Encoder reader assembly - Located on the back of the carriage assembly

CH971-91425 - Mylar encoder strip and foam tape - It is long enough for a 2.5m (98-inch) printer and can be trimmed down for smaller printers - Part requires you to reuse the existing aluminum bar from the old strip

Extension

CH104-67011 - Frm Platen Extension N

CH154-67010 - Cooling fan - Used on the carriage (all four locations) and the Designjet H image sensor - For use with Scitex FB950 printers only

CH971-91513 - Fan assembly - Cools the electronics box in the printer

CH971-91596 - UV lamp housing cooling fan - For the Scitex FB500/FB700/FB950, and Designjet H-series printers

CH971-91599 - Fan assembly - Located on the top enclosure and end enclosures - For the Scitex FB500/FB700, also the Designjet H-Series

0901596 - Order Ch971-91596

Filter

CH104-67020 - Tube/filter/fitting assembly - Used between the printhead and the air manifold

CH108-60004 - Large cylindrical air filter - Located on the exterior of the vacuum assembly

CH971-91504 - Ink filter - 1.74-inch diameter - Can be used with any ink color - This filter is used in the OHS area of the printer - For use with Scitex FB950 and Designjet H-Series

5064-5555 - Assy pigtail OHS inkbox IC Filter

CH104-67023 - Frm Air Filter Photodiode N

CH971-91639 - Tube/filter/fitting assembly - Used between the printhead and the air manifold

CH971-63013 - Strip Foam 0.125 Thk 0.375 Wd Rubber

Glass Assembly

CH971-91594 - Quartz lamp glass - Inserts below the left or right lamp housing - For the FB500/FB700/FB950 also the Designjet H-Series

Guide

CH971-62845 - Guide Linear Miniature

Hardware

970811 - Frm Mtr Carrdrv Sfemxabcdhij R

CH108-67016 - Kit Lintfree Cloth 12 Cnt

CH154-67043 - ShopVac vacuum - 8-liter capacity - Compatible with all vintages of the Scitex FB950 printer - When installing this part on some vintages, a power cable (included) must be replaced

CH238A - Kit Lintfree Cloth 12 Cnt

CH971-62374 - Tube Tygon R-3603 0.0625 Id

CH971-62385 - Tube Tygon 2075 0.25 Id 0.375

CH971-62414 - Fitting Male Luer Lock Ring 1/

CH971-62547 - Luer fitting (White) - 1/8-inch, male-taper - Used on the ink tubing

CH971-62550 - Luer fitting (White) - 3/32-inch, male-taper - Used on the ink tubing

CH971-90811 - Carriage drive motor - For Scitex printers Scitex Color Span Carriage Drive Motor unit.

CH971-91491 - Manifold assembly - Includes six valves that mounts on the rear of the carriage above the trolley

CH971-91531 - ShopVac vacuum - 8-liter capacity - Compatible with all vintages of the Scitex FB950 printer

CH971-91544 - Ink pump - Includes the tubing, fitting, and torx fasteners for installation

CH971-91598 - ShopVac vacuum - 8-liter capacity - Compatible with all vintages of the Scitex FB950 printer

CH976-00148 - Check valve assembly (White) - Used in the Off-Head Supply (OHS) - Color-coded for Light Cyan

CH976-00149 - Check valve assembly (Black) - Used in the Off-Head Supply (OHS) - Color-coded for Black

CH976-00150 - Check valve assembly (Red) - Used in the Off-Head Supply (OHS) - Color-coded for Magenta

CH976-00151 - Check valve assembly (Green) - Used in the Off-Head Supply (OHS) - Color-coded for Light Magenta

CH976-00152 - Check valve assembly (Blue) - Used in the Off-Head Supply (OHS) - Color-coded for Cyan

CH976-00153 - Check valve assembly (Yellow) - Used in the Off-Head Supply (OHS) - Color-coded for Yellow

CH980-00219 - Nut Hex Metric Keps M6 Blck Ro

0601310-012 - Screw Pph Sems M4 0.7 Pitch St

CH971-91534 - Frm Sw Media Adv Fmxabcdhijn

0970811 - Carriage drive motor - For Scitex printers

0901491 - Order Ch971-91491

0901598 - Order Ch971-91598

Harness

CH971-50128 - H-Series J1 Wiring Harness

CH971-50141 - H-Series J5 Wiring Harness

CH971-50142 - H-Series J6 Wiring Harness

CH971-50144 - H-Series J7 Wiring Harness

CH971-50145 - H-Series J8 Wiring Harness

Idler

CH971-90716 - Carriage idler assembly - Located on left end of the printer - Includes various parts and instructions describing how to remove and replace the item

CH971-91595 - Idler assembly - Located on service-end of the rail - For use with Scitex FB910/FB950 and the Designjet H-series

0901595 - Order Ch971-91595

CH154-67044 - Hardware kit - Includes 12 clip assemblies and 12 taller luer caps - For use with the Designjet H-series and Scitex FB950

CH971-91602 - Ink line and fittings kit - Includes 24-inch UV ink tubing and an assortment of color-coded luer fittings

CH971-91619 - Kit Mnt Adj Table N

CH154-67091 - UV bulb/lamp - For use with Designjet H-Series and Scitex FB950/FB500/FB700 printers

901488 - FRM ASSY LEFT LAMP N

CH971-91488 - Frm Assy Left Lamp N

CH971-91489 - Frm Assy Right Lamp N

Latch

CH104-67010 - Frm Table Latch N

CH971-91517 - Frm Cbl Lcd Serial N

CH971-91518 - Frm Cbl Lcd Vga N

CH971-91519 - Frm Cbl Lcd Pwr N

CH971-62905 - Brace Table Leg Rght 13.31 Lg 0.625 Wd

CH971-62906 - Brace Table Leg Rght 13.31 Lg 0.625 Wd

Maintenance Kit

CH971-90854 - Grease kit - Used to lubricate gritroll bearings, media drive worm gear, and up/down threads of the media hold-down roller

Media

CH104-67003 - Frm N Media Drive

CH971-56981 - Assy Media Drive Piranha

CH971-91537 - Frm Media Thk Snsr N

CH971-91575 - Frm Media Collet N

CH971-91604 - Frm Media Spool N

Motor

CH971-90713 - Media advance motor - Only includes the motor

CH971-91533 - Service station wiper motor - Moves the wiper head in the Y axis - For the Scitex FB500/FB700/FB950, also the Designjet H-Series

Packaging

CH971-91610 - Frm Repackaging Universal Exchange

CH971-91540 - Frm Repackaging N

CH104-67019 - Frm Leveling Pad N

PC Board

CH971-91512 - Power distribution board - Routes inbound AC to the various printer power supplies - For the Scitex FB500/FB700, and the Designjet H-Series

CH971-91542 - Main controller board - Used for the Off-Head Supply (OHS) - Has sockets for the profilers

CH104-67018 - Frm Assy Motherboard N

CH971-57363 - Brkt Carriage Piranha Head Pcb

CH971-91538 - Frm Assy Pinchroll N

CH971-91607 - Fmk Shim Carriage 5400 Pin Plate N

Plate

CH104-67012 - Frm Upper Trolley Plate N

Platen

CH971-91588 - Frm Blwr Platen N

CH971-91606 - Platen Piranha Upper

CH971-62585 - Ftng 10-32 Unf Plug O-Rng Seal 303 Sst

Power Cord

CH971-62360 - Power cord - 3 pin, 200-250VAC, 50/60Hz, 16/20A, 2.5m (8.2ft) - Has a IEC 60309 industrial plug (Europe)

Power Supply

CH971-60068 - Mini power supply (24VDC) - Powers the ink system vacuum pump only - For use with Scitex FB950 and Designjet H printers

CH971-90826 - ATX power supply - Output voltage 12VDC - Located in the main electronics box

CH971-91083 - Power supply and power plug adapter kit - Needed to implement the external auxiliary power source for IDS vacuum

CH971-91507 - UV power supply - For the Scitex FB500, also used in some models of the Designjet H-Series

CH971-91618 - Ionizer power supply - For replacement of the Simco-branded ionizer-bar power supply only

CH971-91505 - ATX power supply - Output voltage 12VDC - Located in the main electronics box

0901507 - Order Ch971-91507

Pressure Assembly

CH104-67002 - Vacuum/pressure assembly - Pressure pump for the Ink Delivery System (IDS) - Located on the OHS assembly

CH971-91543 - Vacuum pressure assembly

0901543 - Order Ch971-91543

CH104-67013 - Frm Rail Steel Strips N

CH971-50138 - Assy Cbl Piranha Rail Encdr On/Off Sw

CH971-57103 - Assy Rail Piranha

CH971-91535 - Frm Sw Rail Lift N

CH971-91612 - Frm Mtr Piranha Rail N

Reader

CH154-67006 - Encoder reader board - Does not include the metal bracket - This assembly is used on all of the lifting positions - For the Scitex FB950/FB500/FB700 printer

Relay

CH971-91586 - AC relay - Located in the main electronics box

Reservoir

CH104-67001 - Printhead reservoir kit - For use when there is a reservoir leak, fitting problem, or other printhead issues, where jetting is not the problem - For use with any of the piezo-printhead engines

CH971-57266 - Vacuum reservoir - This is a portion of the ink system vacuum - For use with Designjet H series and Scitex FB950 printers

0507266 - Order Ch971-57266

Retainer

CH971-57265 - Tube Retainer Platen 5400 Igus Brkt

CH104-67022 - Frm Steel Trolley Bearings N

CH107-67001 - Gas_Spring,Top_Cover,Q

Roller

CH971-57013 - Track Roller Table Piranha 23 Rlr Black

Sensor

CH971-55394 - Sensor assembly - Used to vacuum pressure in the gator ink delivery system

CH971-60085 - Carriage home sensor - For use with Scitex FB950 printer

Service Parts

0602429-002 - Cbl Cm P Ethernet Cat6 3ft

507139 - Order Ch971-57139

507251 - Order Ch971-91604

507266 - Order Ch971-57266

901489 - Order Ch971-91489

901491 - Order Ch971-91491

901497 - Order Ch971-91497

901507 - Order Ch971-91507

901509 - Order Ch971-91509

901514 - Order Ch971-91514

901515 - Order Ch971-91515

901529 - Order Ch971-91529

901536 - Order Ch971-91536

901543 - Order Ch971-91543

901595 - Order Ch971-91595

901596 - Order Ch971-91596

901598 - Order Ch971-91598

901604 - Order Ch971-91604

CH232A - HP DJ H35000/H45000 Fume Exhaust HW

CH971-57128 - Encl Printer Piranha User Top

CH971-57306 - Insulation Printer 5400 Front

CH971-57307 - Insulation Printer 5400 Left

CH971-57308 - Insulation Printer 5400 Back

CH971-57309 - Insulation Printer 5400 Top

CH971-57310 - Insulation Printer 5400 Right Front

CH971-57311 - Insulation Printer 5400 Right Middle

CH971-57312 - Insulation Printer 5400 Right Back

CH971-62880 - Brkt Ball 10mm 2.5 High

CH971-62939 - Slide 10 Ext 46mm Ball

CH971-62944 - Shft Sst Prec Gnd 0.375 Dia 10 Lg

CH971-63054 - Wshr Shldr M3 Nylon

CH971-91496 - Frm Trolley N

CH971-91498 - Frm Ionizer N

CH971-91500 - Frm Strp Encdr 54 N

CH971-91501 - Frm Blt Main Carr Drv 54 N

CH971-91506 - Frm Sply Uv Power Sngl Ch N

CH971-91508 - Frm Cbl Uv Ctrl Igus N

CH971-91510 - Frm Pwr Sply 24 36v Dc N

CH971-91511 - Frm Pwr Sply Ionizer N

CH971-91515 - Frm Brd I/O N

CH971-91520 - Frm Encl Usersd Bottom N

CH971-91521 - Frm Encl Usersd Top N

CH971-91524 - Frm Encl Srvsd Top N

CH971-91525 - Frm Encl Srvsd Bottom N

CH971-91528 - Frm Encl Carr Cvr N

CH971-91536 - Frm Grit Roll N

CH971-91539 - Frm Set 12 Pnch Rlr N

CH971-91541 - Frm Cbl Ohs Control N

CH971-91550 - Frm Cbl Track Gnd N

CH971-91551 - Frm Cbl Trackdata N

CH971-91552 - Frm Cbl Trackpower N

CH971-91587 - Frm Encl Top Middle N

CH971-91617 - Frm Ionizer Ul N

CH971-91632 - Frm Lift Mtr Srv Stn N

CH971-91642 - Frm Edge Hold Down N

901592 - Order Ch971-91592

CH971-91329 - Frm Io Brd Oce Cs7075 Hi Rohs

0507139 - Order Ch971-57139

0507251 - Order Ch971-91604

0901488 - Order Ch971-91488

0901489 - Order Ch971-91489

0901514 - Order Ch971-91514

0901515 - Order Ch971-91515

0901529 - Order Ch971-91529

0901536 - Order Ch971-91536

0901592 - Order Ch971-91592

0901604 - Order Ch971-91604

Service Station

CH971-56942 - Brkt Service Station Piranha Lbrkt Mnt

CH971-91529 - Frm Service Station N

Shaft

CQ114-67110 - Carriage drive shaft - Shaft is knurled to prevent pulley from slipping on the shaft - For the Scitex FB500/FB700/FB910/FB950 printer

CH971-91577 - Carriage drive shaft - Shaft is knurled to prevent pulley from slipping on the shaft - For the Scitex FB500/FB700/FB910/FB950 printer

Stand

CH971-57251 - Assy Spool Piranha Stand

Support

CH971-57125 - Brkt Ptr Piranha Vertical Support Right

CH971-57152 - Brkt Ptr Piranha Vertical Support Left

Switch

CH971-91576 - Door switch - Used ont the cover-open detect - For use with Designjet H-series printers

CH971-57671 - Assy Table Height Adjust Piranha

CH971-91573 - Frm Assy Input Table N

CH971-91574 - Frm Assy Output Table N

CH971-91643 - Frm Assy Input+output Tables N

CH971-91608 - Fmk Tape Lcd Piranha N

Thermistor

CH971-91492 - Thermistors kit - Includes two ink and one air temperature thermistor (they have been calibrated together and should be replaced together)

CH971-55984 - Head height gauge tool - This go/no-go gauge is used to set the printhead height to 0.085-inches above the surface of the media

CH971-57693 - Custom tool - Assists removing and installing the main drive belt connection to the carriage

CH971-91631 - Service tools kit - Kit includes the head height gauge, squeeze bottle (for flush), lint-free cloths, luer caps, and the carriage belt - For use with Scitex FB950 and the Designjet H-series

CH971-91227 - U-tube - For use with ink between two printheads of a color

CH971-91499 - Short UV ink tube - Connects to the printhead with a luer fitting and to the ink track tube with multi-colored luer fittings

CH971-91545 - Frm Tube Sol Prs Lng N

CH971-91547 - Frm Tube Vacuum Long N

CH976-00142 - Frm Tube Uv Ink Long White N

CH976-00143 - Frm Tube Uv Ink Long Black N

CH976-00144 - Frm Tube Uv Ink Long Red N

CH976-00145 - Frm Tube Uv Ink Long Green N

CH976-00146 - Frm Tube Uv Ink Long Blue N

CH976-00147 - Frm Tube Uv Ink Long Yellow N

Vacuum

CH971-91344 - Restrictor - For use with all vacuum/pressure assemblies

Wheel

CH971-91611 - Frm Pinch Roller Wheel Single N

Wiper

CH971-91532 - Frm Assy Wiper N

HP DesignJet h35100 oem eu printer

Manufacture:

HP

MPN: CH114A
Description:

HP DesignJet h35100 oem eu printer

Condition: OEM
Warranty: 1 year warranty with OEM supplies from the manufacture.
Product Options:

OEM is not available

Image/s:

This product does not have an image.

Product Tags: CH114A Plotter CH114A CB506-67901

CH104A HP DesignJet H35100 Commercial Printer

HP
HP DesignJet H35100 Commercial Printer
CH104A

CH105A HP DesignJet H35500 Commercial Printer

HP
HP DesignJet H35500 Commercial Printer
CH105A

HP
HP DesignJet H35100 EU Printer
CH265A

HP
HP DesignJet H35500 EU Printer
CH266A