CH251A HP DesignJet h45500 oem eu printer

HP DesignJet h45500 oem eu printer CH251A

Status: Available
Condition: OEM

Your Price: RFQ

Printer Parts
Printer Information
Related Models

Accessory

CH971-63114 - High Density Polyethylene (HDPE) funnel - 32Oz capacity - Facilitates emptying ShopVac waste ink into waste ink bottle

CH971-57158 - Kit Accessory Piranha

CH971-91490 - Y-axis alignment bar - Includes fine-thread screws for adjusting the Y-axis alignment of the printheads - Located in front of the printheads

CH971-57101 - Encl Ohs Piranha Base

Bearing

CH971-91629 - Fmk Tool Bearing Carriage Install N

CH971-91640 - Grit roll bearings kit - Includes 12 units

CH971-90710 - Carriage drive timing belt - Located between the carriage drive motor and the carriage drive shaft. Carriage Drive Timing Belt For HP DJ H35100 H35500 H45500 H45100 and similar Scitex Designjet model family types.

CH971-91530 - Drive belt - Used for the service station wiper motion

Bottle

CH154-67015 - Flush bottle - Squeeze bottle with label for UV flush

CH971-50179 - Assy Cbl Piranha Ac Pwr To Ebox

CH971-91514 - Frm Assy Ebox N

CH971-91592 - Frm Assy Ebox Oce Rohs N

Bracket

CH971-57219 - Carriage drive bracket - For use with Designjet H series and Scitex FB910/FB950 printers

Brush

CH971-57155 - Assy Cvr Piranha Brush

CH971-62994 - Brush Strip 2.5 Lg 0.006 Dia

Cable

CH971-50148 - Cable assembly - Cable between the headboard and the UV lamp - For the Scitex FB950 and the Designjet H-Series

CH971-50163 - Cable harness - Goes from the OHS board to the ink pumps

CH971-52323 - Cable - Used to connect the printer directly to a print server - For use without a hub

CH971-57303 - Cable - Goes from the headboard to the air valve assembly

CH971-91589 - Printhead cap - Used to cap a printhead port or similar luer fitting location

CH971-91590 - Tube cap - Used to cap the end of the luer fitting that normally connects to the ink tube

Carriage

CH971-91497 - Carriage headboard assembly - For use with the Designjet H-Series and Scitex FB950 printer

CH971-91502 - Carriage drive assembly with bracket - For use with Scitex FB950/FB950 and Designjet H series

CH971-57391 - Assy Carriage Holddown Piranha

CH971-91609 - Kit Brg Lower Carriage

CH971-91621 - Frm Assy Carriage N

0901497 - Order Ch971-91497

Caster

CH971-91591 - Frm Caster Stand N

CH971-91647 - Frm Set Caster Stand N

CH154-67045 - Clip assembly - Includes one unit, does not include the taller luer cap required for use with the clamp - Used on the printhead ink U-tubes - For use with Designjet H-series and Scitex FB950

CH971-91001 - Clip - Connected to the trolley and provides attachment points for the carriage drive belt on both ends

Connector

CH971-57327 - Complete ink tube/filter/connectors assembly - Used with the ink boxes - For use with Scitex FB950/FB500/FB700 and Designjet H (CS 5400uv) printers

Control Panel

CQ114-67054 - Touch-sensitive LCD control panel - For the Scitex FB500/FB700 printer

CH971-91509 - Touch-sensitive color LCD control panel - Used on all Designjet H-series and ColorSpan 5400UV series printers

L1Q41-67084 - FrmLcdU FRONT LCD PANEL

0901509 - Order Ch971-91509

Coupler

CH971-91634 - Off-Head Supply (OHS) ink coupler - Includes one coupling and the nut used to secure it on the printer - This is the quick-disconnect attachment for the ink boxes and receives the connector from the inkbox pigtail

Cover

CH971-57139 - Assy Covers Piranha

Encoder

CH154-67005 - Encoder strip actuator assembly - Includes bracket - Used in all lifting assemblies and service station - For the Scitex FB950 printer

CH971-90708 - Encoder reader assembly - Located on the back of the carriage assembly

CH971-91425 - Mylar encoder strip and foam tape - It is long enough for a 2.5m (98-inch) printer and can be trimmed down for smaller printers - Part requires you to reuse the existing aluminum bar from the old strip

Extension

CH104-67011 - Frm Platen Extension N

CH154-67010 - Cooling fan - Used on the carriage (all four locations) and the Designjet H image sensor - For use with Scitex FB950 printers only

CH971-91513 - Fan assembly - Cools the electronics box in the printer

CH971-91596 - UV lamp housing cooling fan - For the Scitex FB500/FB700/FB950, and Designjet H-series printers

CH971-91599 - Fan assembly - Located on the top enclosure and end enclosures - For the Scitex FB500/FB700, also the Designjet H-Series

0901596 - Order Ch971-91596

Filter

CH104-67020 - Tube/filter/fitting assembly - Used between the printhead and the air manifold

CH108-60004 - Large cylindrical air filter - Located on the exterior of the vacuum assembly

CH971-91504 - Ink filter - 1.74-inch diameter - Can be used with any ink color - This filter is used in the OHS area of the printer - For use with Scitex FB950 and Designjet H-Series

5064-5555 - Assy pigtail OHS inkbox IC Filter

CH104-67023 - Frm Air Filter Photodiode N

CH971-91639 - Tube/filter/fitting assembly - Used between the printhead and the air manifold

CH971-63013 - Strip Foam 0.125 Thk 0.375 Wd Rubber

Glass Assembly

CH971-91594 - Quartz lamp glass - Inserts below the left or right lamp housing - For the FB500/FB700/FB950 also the Designjet H-Series

Guide

CH971-62845 - Guide Linear Miniature

Hardware

970811 - Frm Mtr Carrdrv Sfemxabcdhij R

CH108-67016 - Kit Lintfree Cloth 12 Cnt

CH154-67043 - ShopVac vacuum - 8-liter capacity - Compatible with all vintages of the Scitex FB950 printer - When installing this part on some vintages, a power cable (included) must be replaced

CH238A - Kit Lintfree Cloth 12 Cnt

CH971-62374 - Tube Tygon R-3603 0.0625 Id

CH971-62385 - Tube Tygon 2075 0.25 Id 0.375

CH971-62414 - Fitting Male Luer Lock Ring 1/

CH971-62547 - Luer fitting (White) - 1/8-inch, male-taper - Used on the ink tubing

CH971-62550 - Luer fitting (White) - 3/32-inch, male-taper - Used on the ink tubing

CH971-90811 - Carriage drive motor - For Scitex printers Scitex Color Span Carriage Drive Motor unit.

CH971-91491 - Manifold assembly - Includes six valves that mounts on the rear of the carriage above the trolley

CH971-91531 - ShopVac vacuum - 8-liter capacity - Compatible with all vintages of the Scitex FB950 printer

CH971-91544 - Ink pump - Includes the tubing, fitting, and torx fasteners for installation

CH971-91598 - ShopVac vacuum - 8-liter capacity - Compatible with all vintages of the Scitex FB950 printer

CH976-00148 - Check valve assembly (White) - Used in the Off-Head Supply (OHS) - Color-coded for Light Cyan

CH976-00149 - Check valve assembly (Black) - Used in the Off-Head Supply (OHS) - Color-coded for Black

CH976-00150 - Check valve assembly (Red) - Used in the Off-Head Supply (OHS) - Color-coded for Magenta

CH976-00151 - Check valve assembly (Green) - Used in the Off-Head Supply (OHS) - Color-coded for Light Magenta

CH976-00152 - Check valve assembly (Blue) - Used in the Off-Head Supply (OHS) - Color-coded for Cyan

CH976-00153 - Check valve assembly (Yellow) - Used in the Off-Head Supply (OHS) - Color-coded for Yellow

CH980-00219 - Nut Hex Metric Keps M6 Blck Ro

0601310-012 - Screw Pph Sems M4 0.7 Pitch St

CH971-91534 - Frm Sw Media Adv Fmxabcdhijn

0970811 - Carriage drive motor - For Scitex printers

0901491 - Order Ch971-91491

0901598 - Order Ch971-91598

Harness

CH971-50128 - H-Series J1 Wiring Harness

CH971-50141 - H-Series J5 Wiring Harness

CH971-50142 - H-Series J6 Wiring Harness

CH971-50144 - H-Series J7 Wiring Harness

CH971-50145 - H-Series J8 Wiring Harness

Idler

CH971-90716 - Carriage idler assembly - Located on left end of the printer - Includes various parts and instructions describing how to remove and replace the item

CH971-91595 - Idler assembly - Located on service-end of the rail - For use with Scitex FB910/FB950 and the Designjet H-series

0901595 - Order Ch971-91595

CH154-67044 - Hardware kit - Includes 12 clip assemblies and 12 taller luer caps - For use with the Designjet H-series and Scitex FB950

CH971-91602 - Ink line and fittings kit - Includes 24-inch UV ink tubing and an assortment of color-coded luer fittings

CH971-91619 - Kit Mnt Adj Table N

CH154-67091 - UV bulb/lamp - For use with Designjet H-Series and Scitex FB950/FB500/FB700 printers

901488 - FRM ASSY LEFT LAMP N

CH971-91488 - Frm Assy Left Lamp N

CH971-91489 - Frm Assy Right Lamp N

Latch

CH104-67010 - Frm Table Latch N

CH971-91517 - Frm Cbl Lcd Serial N

CH971-91518 - Frm Cbl Lcd Vga N

CH971-91519 - Frm Cbl Lcd Pwr N

CH971-62905 - Brace Table Leg Rght 13.31 Lg 0.625 Wd

CH971-62906 - Brace Table Leg Rght 13.31 Lg 0.625 Wd

Maintenance Kit

CH971-90854 - Grease kit - Used to lubricate gritroll bearings, media drive worm gear, and up/down threads of the media hold-down roller

Media

CH104-67003 - Frm N Media Drive

CH971-56981 - Assy Media Drive Piranha

CH971-91537 - Frm Media Thk Snsr N

CH971-91575 - Frm Media Collet N

CH971-91604 - Frm Media Spool N

Motor

CH971-90713 - Media advance motor - Only includes the motor

CH971-91533 - Service station wiper motor - Moves the wiper head in the Y axis - For the Scitex FB500/FB700/FB950, also the Designjet H-Series

Packaging

CH971-91610 - Frm Repackaging Universal Exchange

CH971-91540 - Frm Repackaging N

CH104-67019 - Frm Leveling Pad N

PC Board

CH971-91512 - Power distribution board - Routes inbound AC to the various printer power supplies - For the Scitex FB500/FB700, and the Designjet H-Series

CH971-91542 - Main controller board - Used for the Off-Head Supply (OHS) - Has sockets for the profilers

CH104-67018 - Frm Assy Motherboard N

CH971-57363 - Brkt Carriage Piranha Head Pcb

CH971-91538 - Frm Assy Pinchroll N

CH971-91607 - Fmk Shim Carriage 5400 Pin Plate N

Plate

CH104-67012 - Frm Upper Trolley Plate N

CH971-91628 - Frm Assy Ohs 3 Color Pump Plate N

Platen

CH971-91588 - Frm Blwr Platen N

CH971-91606 - Platen Piranha Upper

CH971-62585 - Ftng 10-32 Unf Plug O-Rng Seal 303 Sst

Power Cord

CH971-62360 - Power cord - 3 pin, 200-250VAC, 50/60Hz, 16/20A, 2.5m (8.2ft) - Has a IEC 60309 industrial plug (Europe)

Power Supply

CH971-60068 - Mini power supply (24VDC) - Powers the ink system vacuum pump only - For use with Scitex FB950 and Designjet H printers

CH971-90826 - ATX power supply - Output voltage 12VDC - Located in the main electronics box

CH971-91083 - Power supply and power plug adapter kit - Needed to implement the external auxiliary power source for IDS vacuum

CH971-91507 - UV power supply - For the Scitex FB500, also used in some models of the Designjet H-Series

CH971-91618 - Ionizer power supply - For replacement of the Simco-branded ionizer-bar power supply only

CH971-91505 - ATX power supply - Output voltage 12VDC - Located in the main electronics box

0901507 - Order Ch971-91507

Pressure Assembly

CH104-67002 - Vacuum/pressure assembly - Pressure pump for the Ink Delivery System (IDS) - Located on the OHS assembly

CH971-91543 - Vacuum pressure assembly

0901543 - Order Ch971-91543

CH104-67013 - Frm Rail Steel Strips N

CH971-50138 - Assy Cbl Piranha Rail Encdr On/Off Sw

CH971-57103 - Assy Rail Piranha

CH971-91535 - Frm Sw Rail Lift N

CH971-91612 - Frm Mtr Piranha Rail N

Reader

CH154-67006 - Encoder reader board - Does not include the metal bracket - This assembly is used on all of the lifting positions - For the Scitex FB950/FB500/FB700 printer

Relay

CH971-91586 - AC relay - Located in the main electronics box

Reservoir

CH104-67001 - Printhead reservoir kit - For use when there is a reservoir leak, fitting problem, or other printhead issues, where jetting is not the problem - For use with any of the piezo-printhead engines

CH971-57266 - Vacuum reservoir - This is a portion of the ink system vacuum - For use with Designjet H series and Scitex FB950 printers

0507266 - Order Ch971-57266

Retainer

CH971-57265 - Tube Retainer Platen 5400 Igus Brkt

CH104-67022 - Frm Steel Trolley Bearings N

CH107-67001 - Gas_Spring,Top_Cover,Q

Roller

CH971-57013 - Track Roller Table Piranha 23 Rlr Black

Sensor

CH971-55394 - Sensor assembly - Used to vacuum pressure in the gator ink delivery system

CH971-60085 - Carriage home sensor - For use with Scitex FB950 printer

Service Parts

0602429-002 - Cbl Cm P Ethernet Cat6 3ft

507139 - Order Ch971-57139

507251 - Order Ch971-91604

507266 - Order Ch971-57266

901489 - Order Ch971-91489

901491 - Order Ch971-91491

901497 - Order Ch971-91497

901507 - Order Ch971-91507

901509 - Order Ch971-91509

901514 - Order Ch971-91514

901515 - Order Ch971-91515

901529 - Order Ch971-91529

901536 - Order Ch971-91536

901543 - Order Ch971-91543

901595 - Order Ch971-91595

901596 - Order Ch971-91596

901598 - Order Ch971-91598

901604 - Order Ch971-91604

CH232A - HP DJ H35000/H45000 Fume Exhaust HW

CH971-57128 - Encl Printer Piranha User Top

CH971-57306 - Insulation Printer 5400 Front

CH971-57307 - Insulation Printer 5400 Left

CH971-57308 - Insulation Printer 5400 Back

CH971-57309 - Insulation Printer 5400 Top

CH971-57310 - Insulation Printer 5400 Right Front

CH971-57311 - Insulation Printer 5400 Right Middle

CH971-57312 - Insulation Printer 5400 Right Back

CH971-62880 - Brkt Ball 10mm 2.5 High

CH971-62939 - Slide 10 Ext 46mm Ball

CH971-62944 - Shft Sst Prec Gnd 0.375 Dia 10 Lg

CH971-63054 - Wshr Shldr M3 Nylon

CH971-91496 - Frm Trolley N

CH971-91498 - Frm Ionizer N

CH971-91500 - Frm Strp Encdr 54 N

CH971-91501 - Frm Blt Main Carr Drv 54 N

CH971-91506 - Frm Sply Uv Power Sngl Ch N

CH971-91508 - Frm Cbl Uv Ctrl Igus N

CH971-91510 - Frm Pwr Sply 24 36v Dc N

CH971-91511 - Frm Pwr Sply Ionizer N

CH971-91515 - Frm Brd I/O N

CH971-91520 - Frm Encl Usersd Bottom N

CH971-91521 - Frm Encl Usersd Top N

CH971-91524 - Frm Encl Srvsd Top N

CH971-91525 - Frm Encl Srvsd Bottom N

CH971-91528 - Frm Encl Carr Cvr N

CH971-91536 - Frm Grit Roll N

CH971-91539 - Frm Set 12 Pnch Rlr N

CH971-91541 - Frm Cbl Ohs Control N

CH971-91550 - Frm Cbl Track Gnd N

CH971-91551 - Frm Cbl Trackdata N

CH971-91552 - Frm Cbl Trackpower N

CH971-91587 - Frm Encl Top Middle N

CH971-91617 - Frm Ionizer Ul N

CH971-91632 - Frm Lift Mtr Srv Stn N

CH971-91642 - Frm Edge Hold Down N

901592 - Order Ch971-91592

CH971-91329 - Frm Io Brd Oce Cs7075 Hi Rohs

0507139 - Order Ch971-57139

0507251 - Order Ch971-91604

0901488 - Order Ch971-91488

0901489 - Order Ch971-91489

0901514 - Order Ch971-91514

0901515 - Order Ch971-91515

0901529 - Order Ch971-91529

0901536 - Order Ch971-91536

0901592 - Order Ch971-91592

0901604 - Order Ch971-91604

Service Station

CH971-56942 - Brkt Service Station Piranha Lbrkt Mnt

CH971-91529 - Frm Service Station N

Shaft

CQ114-67110 - Carriage drive shaft - Shaft is knurled to prevent pulley from slipping on the shaft - For the Scitex FB500/FB700/FB910/FB950 printer

CH971-91577 - Carriage drive shaft - Shaft is knurled to prevent pulley from slipping on the shaft - For the Scitex FB500/FB700/FB910/FB950 printer

Stand

CH971-57251 - Assy Spool Piranha Stand

Support

CH971-57125 - Brkt Ptr Piranha Vertical Support Right

CH971-57152 - Brkt Ptr Piranha Vertical Support Left

Switch

CH971-91576 - Door switch - Used ont the cover-open detect - For use with Designjet H-series printers

CH971-57671 - Assy Table Height Adjust Piranha

CH971-91573 - Frm Assy Input Table N

CH971-91574 - Frm Assy Output Table N

CH971-91643 - Frm Assy Input+output Tables N

CH971-91608 - Fmk Tape Lcd Piranha N

Thermistor

CH971-91492 - Thermistors kit - Includes two ink and one air temperature thermistor (they have been calibrated together and should be replaced together)

0901492 - Thermistors kit - Includes two ink and one air temperature thermistor (they have been calibrated together and should be replaced together)

CH971-55984 - Head height gauge tool - This go/no-go gauge is used to set the printhead height to 0.085-inches above the surface of the media

CH971-57693 - Custom tool - Assists removing and installing the main drive belt connection to the carriage

CH971-91631 - Service tools kit - Kit includes the head height gauge, squeeze bottle (for flush), lint-free cloths, luer caps, and the carriage belt - For use with Scitex FB950 and the Designjet H-series

CH971-91227 - U-tube - For use with ink between two printheads of a color

CH971-91499 - Short UV ink tube - Connects to the printhead with a luer fitting and to the ink track tube with multi-colored luer fittings

CH971-91545 - Frm Tube Sol Prs Lng N

CH971-91547 - Frm Tube Vacuum Long N

CH976-00142 - Frm Tube Uv Ink Long White N

CH976-00143 - Frm Tube Uv Ink Long Black N

CH976-00144 - Frm Tube Uv Ink Long Red N

CH976-00145 - Frm Tube Uv Ink Long Green N

CH976-00146 - Frm Tube Uv Ink Long Blue N

CH976-00147 - Frm Tube Uv Ink Long Yellow N

Vacuum

CH971-91344 - Restrictor - For use with all vacuum/pressure assemblies

Wheel

CH971-91611 - Frm Pinch Roller Wheel Single N

Wiper

CH971-91532 - Frm Assy Wiper N